SANTI Battery 24Ah Скачать руководство пользователя страница 4

Warnings

Warranty

1.03

1.04

• Read and follow the manual before use. 

• Products from Heating System range are dedicated only for drysuit divers. 

• Use with appropriate battery source. Batteries should not exceed 12 Volts! 

• Charge with supplied charger only! 

• Protect the plug before washing heating undergamment (washing machine allowed). 

• The power must be switched off when out of the water. 

• Switch off immediately when drysuit is flooded or when malfunction is suspected. 

• Do not disassemble or modify the product.

• Do not combine with other heating system products if they are not compatible with the 

product.

• Be careful not to cross the cables against each other, make sure they are not banded or 

folded while using. 

• The cables need to be well stretched under your suit.

• Before each dive inspect thoroughly all electrical cords and connections. If you notice any 

mechanical break or cut, do not use the product for diving, as this might cause serious injury. 

Once you notice any damage to the cables, contact SANTI service for repair or replacement 

of the broken parts.

• The product is equipped with the necessary wiring to allow the connection to the external 

power supply through valve connector or thermo valve.

Limited Warranty for SANTI heating system products

With this limited warranty certificate SANTI declares that the product is free from defects in 

fabrics, components and craftsmanship at the time of the purchase. Please read all warnings 

and safety instructions before use and keep the original sales proof. This must be shown when 

repair should be covered by warranty. The product needs to be claimed by the dealer where 

it was purchased.

SANTI heated products come with 12-month guarantee against defects in materials and 

workmanship. The warranty does not cover damage due to: abuse, neglect, improper usage, 

lack of maintenance or normal wear and tear, especially mechanical cut of the cables, 

any change or modification made by the user or by the third parties, use of incompatible 

accessories that are not part of  SANTI product range. 

SANTI shall not be responsible in any case for incidental or consequential damages (without 

any limitation whatsoever to one or more persons) resulting from non-fulfillment of the 

obligations arising from this warranty when it comes to SANTI products.

  

If any defect covered by this limited warranty appears within 12 months from the date of 

purchase SANTI will repair, exchange parts or replace the defective product.  Warranty repair 

can only be done at SANTI HQ service department.  Any changes or technical intrusion results 

in warranty loss.

This warranty is valid only if the enclosed warranty form is fully filled out with following 

information: product name, name of the authorized dealer, product serial number, 

product purchase date. Serial number is stated on the inside label.

SANTI  reserves the right not to carry out repairs under warranty if any original information is 

removed or modified on the product after the original date of purchase of the product from a 

dealer.

Содержание Battery 24Ah




























Отзывы: