SANTI Battery 24Ah Скачать руководство пользователя страница 20

7.06

Key factors for the safety and lifetime of the battery and charger:

Battery has a number of safeguards to protect against damage, even though you should meet 

the following precautions:

• never allow the battery to be discharged below 8V,

• do not open the battery or charger or modify their design,

• do not short-circuit the external contacts of the battery or charger,

• do not connect the battery to batteries of other manufacturers or with different capacities,

• do not throw the battery or charger,

• do not put the battery or the charger to the fire,

• indoor charging is recommended while protecting from unexpected weather conditions,

• use this charger only with the Li-Ion battery packs. Never use with NiMH batteries, NiCd or 

lead-acid, it may lead to damage or even injury to any person directly exposed,

• provide adequate ventilation during the charging process and avoid using any heat emitting 

or interfering devices nearby,

• disconnect the battery charger and contact SANTI Service Department whenever there is a 

damaged power cord or plug, liquid enters inside, the housing is destroyed or any other than 

described in the manual incorrect operation of the unit is noticed,

• the battery should be stored only when charged to minimum of 70% in a dry place,

• store the battery at temperatures between 2 °C and 40 °C (36 °F and 104 °F),

• never charge frozen battery or at freezing temperature. It may become a cause of damages. 

If battery was in low temperature for a long time, it should be left in a warm temperature for 

several hours before use or charging,

• check the battery level every half a year, never store battery which is fully discharged,

• keep the battery away from children,

• using the battery or charger violating their intended purpose may result in damage to either 

the battery or the charger or devices connected to them, and cause loss of life or health,

• SANTI DIVING is not responsible for any damage or loss which are result of inappropriate 

use of the battery or charger, especially against above recommendations.

7.05

Charger operators manual:

WARNINGS

• The charger should only be used for Li-ion battery packs, working with voltage 11.1 - 12.6V. 

If the charger is connected to other types of batteries with different nominal voltage, it can 

be damaged. 

• Never use with NiMH, NiCd or lead - acid batteries, as this can lead to damage or even injury 

of the people nearby. 

• The charger is designed for operation in confined spaces. Protect against adverse weather 

conditions. 

• Do not open the charger, due to the high voltage supply. 

• In case of damage to the power cord or plug, any liquid entering  the housing, damage to the 

housing, or incorrect operation of the unit other than described in the manual, disconnect 

the charger from the power supply and contact the SANTI service department for advice.

• During the charging process make sure that the charger and battery have good ventilation 

and avoid placement near other devices generating heat. Failure may result in damage to 

the battery or charger.

Содержание Battery 24Ah




























Отзывы: