SANTI Battery 24Ah, Руководство пользователя

Страница: 17 / 27

6.05 6.06
Charging:
Charge the battery using the supplied battery charger using E/O cord connection cable. Plug
the charger to a power source 100-240V. LCD screen lights up in blue showing 12,6V as the
value of the charging voltage. Next, connect the battery to the charger, through the connector
E/O cord. Display at the charger turns red showing the percentage of the battery charge. When
the battery is fully charged, the LCD backlight will turn blue indicating a value of 100%. After
the charging process is finished, disconnect the battery and power source.
The charger has also a USB output for charging other portable devices such as a phone/
tablet (1A).
Charger parameters:
• charger is designed for Li-Ion 10,8 - 11,1V batteries charging,
• after full charge, battery is disconnect automatically by the charger,
• supply voltage range: 100-265V AC 50-60Hz,
• input current: 1,8A,
• output voltage: 12,6VDC,
• output current: 3A,
• USB output: 5VDC 1A,
• output power: 90W,
• dimensions: 132mm x 58mm x 30mm,
• weight: 365g.
Key factors for the safety and lifetime of the battery and charger:
Battery has a number of safeguards to protect against damage, even though you should meet
the following precautions:
• never allow the battery to be discharged below 8V,
• do not open the battery or charger or modify their design,
• do not short-circuit the external contacts of the battery or charger,
• do not connect the battery to batteries of other manufacturers or with different capacities,
• do not throw the battery or charger,
• do not put the battery or the charger to the fire,
• indoor charging is recommended while protecting from unexpected weather conditions,
• use this charger only with the Li-Ion battery packs. Never use with NiMH batteries, NiCd or
lead-acid, it may lead to damage or even injury to any person directly exposed,
• provide adequate ventilation during the charging process and avoid using any heat emitting
or interfering devices nearby,
• disconnect the battery charger and contact SANTI Service Department whenever there is a
damaged power cord or plug, liquid enters inside, the housing is destroyed or any other than
described in the manual incorrect operation of the unit is noticed,
• the battery should be stored only when charged to minimum of 70% in a dry place,
• store the battery at temperatures between 2 °C and 40 °C (36 °F and 104 °F),
• never charge frozen battery or at freezing temperature. It may become a cause of damages.
If battery was in low temperature for a long time, it should be left in a warm temperature for
several hours before use or charging,
• check the battery level every half a year, never store battery which is fully discharged,
• keep the battery away from children,
• using the battery or charger violating their intended purpose may result in damage to either
the battery or the charger or devices connected to them, and cause loss of life or health,
• SANTI DIVING is not responsible for any damage or loss which are result of inappropriate
use of the battery or charger, especially against above recommendations.