SANTI Battery 24Ah, Руководство пользователя

Страница: 18 / 27

SANTI 6Ah battery Product specification
Maintenance-free battery, do not open.
Opening the housing results in loss of warranty.
7.01 7.02
It is based on advanced Li-Ion cells with high discharge current, so that it is possible to connect
elements with a total power of up to 100W. The set is enclosed in an ergonomic case, with the
E/O cord connection cable and piezo switch fitted through the upper lid of the container. The
battery is switched on by touching the flat switch on the lid and the operation is signaled by
a blue backlight placed on the E/O cord connector. The container is equipped with a special
opening, designed to secure the battery pack on the belt.
The battery is designed to work with a vest and gloves from the SANTI heating system range.
There is also the possibility to use the battery with any torch if its power does not exceed 100W.
Operating time (heating) with the components of the SANTI heating systems:
heating gloves: 1h45min ~ 2h,
heating vest: 1h15min ~ 1h30min,
vest with gloves: 30 ~ 45min.
The battery should be connected to the chosen heating element to the SANTI drysuit valve
connector or SANTI Thermovalve by using the E/O cord connector. When storing, the battery
should remain turned off. It is recommended not to leave the battery discharged for more than
6 months.
To avoid the electrolysis process, the battery should not be switched on in water while the E/O
cord is not connected to any receiving device.