User manual
SNC-331DLNN
_________________________________________________________________________________
- 47 -
Anti-Dither:
The camera can only process one event/alarm at the same time. Here you can define the
interval (0-100 seconds) between two events/alarms.
Area:
You can define up to 4 areas for motion detection. By default, the whole area is activated. If
you wish to select only a few areas in the grid, empty the grid by clicking „Remove all“ or
right-click. Drag the mouse into the desired fields in the grid. Proceed in the same way for the
other area definition.
For each area, the sensitivity and threshold for motion detection can be defined.
Manual control excluded (only available for camera model SNC-211RSIA):
If enabled, the manual PTZ control of the camera will be deactivated as long as the alarm
lasts.
Record:
Enable the alarm recording function. If enabled, the system makes event-triggered
recordings. If y continuous recording is active, it will not be deactivated. In the recording
there will be a hint regarding the time of this event.
Record delay:
Define the interval between 2 recordings. This interval may range from 10 to 300 seconds.
Default is 10 seconds.
Send e-mail:
If enabled, an e-mail notification is sent to the defined e-mail address(es) in case of a
detected motion (see chapter 4.4.6).
