User manual SanStore-4EM / SanStore-8EM
_________________________________________________________________________________
- 54 -
The [MENU] button is the guide anchor position for all other buttons/functions.
If you are in PTZ mode, the buttons are valid for PTZ settings.
Note:
Please check the following before making any PTZ settings:
RS-422/485 connection and camera jumper settings
In the display menu, enter the ID and protocols of the PTZ camera.
7.2 Preset and tour
Button
Function
Set the preset position. Press the [SPOT OUT] button on the remote
control.
a.
Move the PTZ camera into the desired position.
b.
Press the [Preset] button.
c.
“Custom 1” will illuminate.
d.
Set the number for the preset position.
e.
Press the [Enter] button to save the presets and to exit the menu.
Go to the preset position. Press the [INFO] button on remote the
control.
a.
Press the [Go] button.
b.
Enter the desired preset number and the press the [Enter] button.
Start auto tour. Press the [BACKUP] button on the remote control.
a.
Press the [Auto Tour] button.
b.
Press the [ + ] button and the enter the range of presets.
c.
Press [Enter] to confirm.
7.3
Custom functions
Button
Function
First PTZ custom function: [DISPLAY] button on the remote control
Second PTZ custom function: [ZOOM] button on the remote control
Third PTZ custom function: [PTZ] button on the remote control
Please also read the user manual of your PTZ camera manufacturer in order to set the
correct jumper adjustments, aligned with the protocols of the recorder.
