User manual SanStore-4EM / SanStore-8EM
_________________________________________________________________________________
- 41 -
6.8 Network
The IP address can be set as static or as dynamic.
The static service consists of an IP address that remains constant for the duration of the
contract of the internet service. The dynamic service consists of an IP address that frequently
changes every time a new connection is made through the provided modem, or recurrently in
a given period of time. Though most internet service providers offer both solutions, this
manual will distinguish the two solutions according to the commonly available service type to
configure the DVR for the networking purposes.
6.8.1 IP settings
Procedure:
Use the direction buttons [
]
to select „network“. Press [ENTER] to confirm.
Use the down button [
] to select an item.
Use the [- +] buttons to change the values.
Press [ENTER] to save the changes and to exit the menu.
Press [CANCE] to exit the menu without saving the changes.
ITEM
ADJUSTMENT
CONFIG
STATIC IP:
Edit the IP address, gateway and netmask.
DHCP: Dynamic Host Configuration Protocol.
if there is a local DHCP server, this option is active automatically. The DHCP
is not active if the recorder is not connected to a WAN network.
IP SETUP
Edit “IP address”, “gateway” and “netmask”.
PORT
Select a value between 0000 9999:
The DVR’s connection port can be adjusted in case the default port 7000 is
blocked. The DVR’s service port may be modified to allow the connection
via the SanView software..
