User manual
SanStore-4HDX, SanStore-8HDX, SanStore-16HDXS
_________________________________________________________________________________
- 61 -
7.5.4 E-mail
The following settings can be adjusted:
Notice:
If enabled, an e-mail will be sent when an alarm is triggered.
In addition, en e-mail server has to be installed in your network settings. This e-mail
address has to be entered there and the box “Send e-mail” has to be activated.
Example: To receive an e-mail in case of an alarm, it is required to enable the tab
„Schedule“ in the recording setup page.
Setup:
If enabled, an e-mail is sent when menu settings are changed.
HDD event:
If enabled, an e-mail is sent when a HDD event is triggered.
Reboot:
If enabled, an e-mail is sent when the recorder is rebooting.
Sensor / video loss / motion:
If an alarm is triggered on the respective channel, an e-mail will be sent.
Frequency:
1-60 min. Depending on how often an alarm occurs in the defined period, an e-mail
will be sent.
Example: 10 minutes:
If an alarm occurs three times within 10 minutes, only one e-mail will be sent but
including the information on all three alarm types.