Sans Digital ES208X12HP, Руководство по установке, Страница: 21 / 126

20
waiting the initialization complete. In “Foreground Initialization”, the initialization proceeds must be
completed before the volume set ready for system accesses. In “No Init”, there is no initialization on this
volume.
10. If space remains in the RAID set, the next volume set can be configured. Repeat steps 8 to 10 to configure
another volume set.
If the current controller has unused drives connected, you can choose the “Create Hot Spare” option in the “Raid Set
Function” to define a global hot spare. Select this method to configure new RAID sets and volume sets. The “Raid
Set/Volume Set Function” configuration option allows you to associate volume sets with partial and full RAID sets.
3.7. Main Menu
The main menu shows all functions that are available for executing actions, which is accomplished by clicking on the
appropriate link.
Figure 1: Main Menu
Option Description
Quick Volume/Raid Setup Create a default configuration based on the
number of physical disk installed
Raid Set Function Create a customized RAID set
Volume Set Function Create a customized volume set
Physical Drives View individual disk information
Raid System Function Setup the RAID system configuration
Hdd Power Management Manage HDD power based on usage patterns
Ethernet Configuration LAN port setting
View System Events Record all system events in the buffer
Clear Event Buffer Clear all information in the event buffer
Hardware Monitor Show the hardware system environment status
System Information View the controller system information
Table 3: Main Menu Table
This password option allows user to set or clear the RAID controller’s password protection feature. Once the
password has been set, the user can only monitor and configure the RAID controller by providing the correct
password. The password is used to protect the internal RAID controller from unauthorized entry. The controller will
prompt for the password only when entering the main menu from the initial screen. The RAID controller will
automatically return to the initial screen when it does not receive any command in five minutes.
Note:
The default password is set to 0000; This password can be modified by selecting Change Password in the RAID
System Function section.