Sans Digital ER208UT+B, Руководство пользователя

Страница: 96 / 162

VT-100 UTILITY CONFIGURATION
96
Arrow Key: Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Sans Digital RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Mute The Alert Beeper
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
Host NCQ Mode Setting
HDD Read Ahead Cache
Volume Data Read Ahead
Stagger Power On
Spin Down Idle HDD
Empty HDD Slot LED
HDD SMART Status Polling
Auto Activate Raid Set
Capacity Truncation
Terminal Port Config
Update Firmware
Shutdown Controller
Restart Controller
Terminal Port Config
Terminal Port Config
1200
Stop Bits : 1 bit
Baud Rate: 115200
Multiples Of 10G: If you have 120 GB drives from different
vendors; chances are that the capacity varies slightly. For
example, one drive might be 123.5 GB, and the other 120 GB.
“Multiples Of 10G” truncates the number under tens. This makes
the same capacity for both of these drives so that one could
replace the other.
Multiples Of 1G: If you have 123 GB drives from different
vendors; chances are that the capacity varies slightly. For
example, one drive might be 123.5 GB, and the other 123.4 GB.
“Multiples Of 1G” truncates the fractional part. This makes the
same capacity for both of these drives so that one could replace
the other.
Disabled: It does not truncate the capacity.
4 .5.5.16 Terminal Port Config
Parity Value is fixed at None.
Handshaking value is fixed at None.
Speed sending values are 1200, 2400, 4800, 9600, 19200,
38400, 57600, and 115200.
Stop Bits values are 1 bit and 2 bits.