Sans Digital ER208UT+B, Руководство пользователя

Страница: 22 / 162

LCD CONFIGURATION MENU
22
3. LCD Configuration Menu
After the hardware installation, the disk drives connected to the RAID
controller must be configured and the volume set units initialized
before they are ready to use. This can be also accomplished by the rear
panel touch-control keypad.
The LCD module on the backside can access the built-in configuration
and administration utility that resides in the controller’s firmware.
To complete control and management of the array’s physical drives
and logical units can be performed from the rear panel, requiring no
additional hardware or software drivers for that purpose.
The LCD provides a system of screens with areas for information,
status indication, or menus. The LCD screen displays up to two lines at
a time of menu items or other information.
The LCD display back panel function keys are the primary user
interface for the RAID controller. Except for the "Firmware update", all
configurations can be performed through this interface.
Function Key Definitions
The four function keys at the back panel of the button perform the
following functions:
Key Function
Up Arrow Use to scroll the cursor Upward/Rightward
Down Arrow Use to scroll the cursor Downward/Leftward
ENT Key Submit Select ion Function (Confirm a selected Item)
ESC Key Return to Previous Screen (Exit a selection configuration)
3 .1 Starting LCD Configuration Utility
After power on the EliteRAID RAID controller, press ENT to verify
password for entering the main menu from LCD panel. Using the
UP/DOWN buttons to select the menu item, then press ENT to
confirm it. Press ESC to return to the previous screen.