Sans Digital ER208UT+B, Руководство пользователя

Страница: 118 / 162

118
WEB BROWSER-BASED CONFIGURATION
5 .5.4 Check Volume Set
To check a volume set from a raid set:
1. Click on the “Check Volume Set” link.
2. Tick on the volume set from the list that you wish to check.
Tick on “Confirm The Operation” and click on the “Submit” button.
Use this option to verify the correctness of the redundant data in
a volume set. For example, in a system with dedicated parity, vol-
ume set check means computing the parity of the data disk drives
and comparing the results to the contents of the dedicated parity
disk drive. The checking percentage can also be viewed by click-
ing on “RaidSet Hierarchy” in the main menu.
5 .5.5 Stop Volume Set Check
Use this option to stop the “Check Volume Set” function.
5 .6 Physical Drive
Choose this option from the Main Menu to select a physical disk
and to perform the operations listed below.
5 .6.1 Create Pass Through
To create pass-through disk, move the mouse cursor to the main
menu and click on the “Create Pass Through” link. The relative
setting function screen appears.
Disk is no controlled by the RAID controller firmware, thus, it can
not be a part of a volume set. The disk is available to the operat-
ing system as an individual disk. It is typically used on a system
where the operating system is on a disk not controlled by the
RAID firmware. User can also select the Volume Cache Mode,
SATA Data Xfer Mode and Channel Drive# for this volume.