Sans Digital ER208UT+B, Руководство пользователя

Страница: 51 / 162

LCD CONFIGURATION MENU
51
Configuration" function and press ENT . Using UP/DOWN
buttons to select DHCP, then press ENT.
Select the “Disabled” or “Enabled” option to enable or disable
the DHCP function. If DHCP is disabled, it will be necessary to
manually enter a static IP address that does not conflict with
other devices on the network.
3 .7.7.2 Local IP Adress
If you intend to set up your client computers manually (no
DHCP), make sure that the assigned IP address is in the same
range as the default router address and that it is unique to your
private network. However, it is highly recommend to use DHCP
if that option is available on your network. An IP address alloca-
tion scheme will reduce the time it takes to set-up client com-
puters and eliminate the possibilities of administrative errors
and duplicate addresses. To manually configure the IP address
of the RAID controller, press the UP/DOWN buttons to select
“Ethernet Configuration" function and press ENT . Using UP/
DOWN buttons to select "Local IP Adress", then press ENT . It
will show the default address setting in the RAID controller You
can then reassign the static IP address of the RAID controller.
3 .7.7.3 HTTP Port Number
To manually configure the HTTP Port Number of the RAID con -
troller, press UP/DOWN buttons to select “Ethernet Configu -
ration" function and press ENT . Using UP/DOWN buttons to
select "HTTP Port Number", then press ENT . It will show the
default address setting in the RAID controller. Then You can re-
assign the default HTTP Port Number of the controller.
3 .7.7.4 Telnet Port Number
To manually configure the Telent Port Number of the RAID con -
troller, press the UP/DOWN buttons to select “Ethernet Con-
figuration" function and press ENT . Using UP/DOWN buttons
to select "Telent Port Number", then press ENT . It will show the
default address setting in the RAID controller. You can then re-
assign the default Telent Port Number of RAID controller.