Sans Digital EliteRAID ER104I+ Скачать руководство пользователя

Страница: 13 / 64

- 13 -

2.4

Enclosure Status

2.4.1

System buzzer

The system buzzer features are listed below:

The system buzzer alarms 1 second when system boots up successfully.

The system buzzer alarms continuously when there is error occurred. The alarm will be

stopped after error resolved or be muted.

The alarm will be muted automatically when the error is resolved. E.g., when RAID 5 is

degraded and alarm rings immediately, user changes/adds one physical disk for rebuilding.
When the rebuilding is done, the alarm will be muted automatically.

2.4.2

LED

The LED features are listed below:

Marquee / Disk Status / Disk Rebuilding LED: The Marquee / Disk Status / Disk Rebuilding

LEDs are displayed in the same LEDs. The LEDs indicates different functions in different
stages.

Marquee LEDs: When system powers on and successfully boots up, the Marquee

LED is on until the system boots successful.

II.

Disk status LEDs: the LEDs reflect the disk status for the tray. Only On/Off situation.

III.

Disk rebuilding LEDs: the LEDs are blinking when the disks are under rebuilding.

Disk Access LED: Hardware activated LED when accessing disks (IO).

Disk Power LED: Hardware activated LED when the disks are plugged in and powered on.

BUSY LED: Hardware activated LED when the front-end channel is busy.

POWER LED: Hardware activated LED when system is powered on.

Содержание EliteRAID ER104I+

































































Результаты поиска

Содержание EliteRAID ER104I+

Отзывы:

Похожие инструкции для EliteRAID ER104I+

Бренды по названию

Популярные бренды

Sans Digital EliteRAID ER104I+, Руководство пользователя

Результаты поиска

Содержание EliteRAID ER104I+

Отзывы:

Похожие инструкции для EliteRAID ER104I+

Бренды по названию

Популярные бренды