Sans Digital EliteRAID ER104I+ Скачать руководство пользователя

Страница: 55 / 64

- 55 -

N-way mirror

Extension to RAID 1 level. It has N copies of the disk. N-way mirror allows N-1

hard drives failure or unplugging.

RAID 3

Striping with parity on the dedicated disk. RAID 3 allows one hard drive failure

or unplugging.

RAID 5

Striping with interspersed parity over the member disks. RAID 5 allows one hard

drive failure or unplugging.

RAID 6

2-dimensional parity protection over the member disks. RAID 6 allows two hard

drives failure or unplugging. If it needs to rebuild two hard drives at the same

time, it will rebuild the first one, then the other in sequence.

RAID 0+1

Mirroring of RAID 0 volumes. RAID 0+1 allows two hard drive failures or

unplugging, but at the same array.

RAID 10

Striping over the member of RAID 1 volumes. RAID 10 allows two hard drive

failure or unplugging, but in different arrays.

RAID 30

Striping over the member of RAID 3 volumes. RAID 30 allows two hard drive

failure or unplugging, but in different arrays.

RAID 50

Striping over the member of RAID 5 volumes. RAID 50 allows two hard drive

failures or unplugging, but in different arrays.

RAID 60

Striping over the member of RAID 6 volumes. RAID 40 allows four hard drive

failures or unplugging, every two in different arrays.

JBOD

The abbreviation of “Just a Bunch Of Disks”. No data protection. RG fails if any
hard drive failures or unplugs.

4.2

RG migration

To migrate the RAID level, please follow below procedures.

Select “/ Volume configuration / RAID group”.

Mouse moves to the gray button next to the RG number; click “Migrate”.

Change the RAID level by clicking the down arrow to “RAID 5”. There will be a pup-up

which indicates that HDD is not enough to support the new setting of RAID level, click
“

” to increase hard drives, then click

“

“ to go back to setup page. When doing migration to lower

RAID level, such as the original RAID level is RAID 6 and user wants to migrate to RAID 0,
system will evaluate whether this operation is safe or not, and appear a message of "Sure to

migrate to a lower protection array?” to give user warning.

Содержание EliteRAID ER104I+

































































Результаты поиска

Содержание EliteRAID ER104I+

Отзывы:

Похожие инструкции для EliteRAID ER104I+

Бренды по названию

Популярные бренды

Sans Digital EliteRAID ER104I+, Руководство пользователя

Результаты поиска

Содержание EliteRAID ER104I+

Отзывы:

Похожие инструкции для EliteRAID ER104I+

Бренды по названию

Популярные бренды