OPERATION
13
§4 Operation
§4.1 Layout for the panel
5
6
7
8
1
2
3
4
1
Negative output
The welder’s negative polarity output.
2
Shield gas connector
Is connected to the gas input pipe of torch.
3
Aero socket
Is connected to torch switch control wire.
4
Positive output
The welder’s positive polarity output.
5
Shield gas input joint
To connect one head of the gas hose while the other head of which is
connected to argon gas cylinder.
6
Power source switch
Switch to “ON”, the welder is turned on, while switch to “OFF”, the
welder is turned off.
7
Power source input
To connect power source.
8
Fan
When the electric welding machine is over-heat, the fan operates. It is used for cooling the
components and parts inside the welder
