Sanotechnik 10591131, Руководство пользователя и инструкция по установке

Страница: 15 / 72

15
SETTING THE TIME AND DAY OF THE WEEK
When starting up, it is important to set the time and the day of the week (Chapter
“Setting of the heater”).
DISPLAY
ON OFF SWITCH
An on / off switch is located under the control box of the device. (1 = On) Use this only
for a long shutdown (several days).
It may be necessary to re-set the date and time after long shutdown.
OPERATING MODES
Several operating modes are available:
• Manual mode:
The device continuously monitors the setpoint temperature (desired
temperature).
• Program mode:
The device follows the pre-recorded internal programs for each day
of the week. These programs define at what hours of the day the radiator must follow
the Comfort temperature (setpoint temperature), the Eco temperature (setpoint tempe -
rature - 3 °C cannot be changed), or be switched off. It is possible to customize these
programs.
• Boost mode:
the device operates at maximum power for a period between 15 and 60
minutes.
FIRST START-UP
On first power-up, Manual mode is selected and the setpoint temperature is set to 19 °C.
BOOST FUNCTION
The Boost function allows the device to operate at maximum power for a period between
15 and 60 minutes, in order to increase the temperature in the bathroom more quickly.
1. From Manual mode or Programming mode, press the key , the Boost function
activation LED comes on, and the activation time is displayed (15 minutes by default
when switching on, or the previously programmed time for following activations);
2. Use the and keys to set the duration in minutes (15, 30, 45 or 60 minutes);
3. After a few seconds without any action, the countdown begins, the LED flashes;
4. When the time is up, the heater returns to the previous mode;
• Press the key again to exit the Boost function before the end of the programmed
duration;
EN
Comfort
Temperature
ECO Temperature
(Comfort -3 °C)
No
heating
Setting the time
and the day
Menu
start
Menu
exit
Assigning
programs to days
Customizing
programs
To use the Program mode, it is essential to have set the day and time.