SANLI GTS33, Руководство оператора

Страница: 11 / 29

Operator’s Manual Sanli GTS33 / 11
Installing the deflector guard
Installing the deflector guard is best carried out with the machine resting on the
engine and handlebars to provide clear access to the deflector support as shown
in figure 5.
Position the deflector guard onto its support and screw in the four fixing screws,
not forgetting the two metal reinforcements as shown in figure 6.
Support Metal reinforcements
Installing the cutter blade
Hold still the spool’s centre core (a, Fig 7) by passing the tool provided through
the two holes as shown in figure 7. With the help of the spanner provided, loosen
the securing nut (b, Fig. 7) in the direction of the arrow.
Central
core
Remove and put in a safe place the securing nut, the brake ring and the
support ring.
NOTE: Securing nut b, Fig. 7, has a left ‐ handed thread. It is therefore loosened
and removed in a clockwise direction and replaced and tightened in an anti ‐
clockwise direction.
Assemble the components shown in figure 8 in the following order:
1) First, place the blade (e) onto the central core
2) Next, place the support ring (d) onto the blade (e)
3) Next, place the brake ring (c) onto the support ring.
Finally, replace and tighten the nut in an anti ‐ clockwise direction, while holding
still the central core using the same method as used when dismantling the
assembly (see above).