SANLI GTS26, Руководство оператора

Страница: 18 / 30

18 / Operator’s Manual Sanli GTS26
WARNING: Do not wring the filter foam to rinse it, you may damage
it in this way.
Clean the inside of the filter box with a clean cloth.
Put the filter foam back in its place and properly close the lid of the
air filter box.
Spark plug
Remove the spark plug cap. Unscrew and remove the spark plug.
Remove the layer of carbon on the spark plug electrodes with a
metallic brush.
Check the electrode gap with the help of a gauge (ideally 0.5 mm)
If the spark plug is worn or damaged, replace it with a new spark
plug made for this motor.
Put the spark plug back in place by screwing it back in by hand,
screwing it in this way until you have contact with the base, then
tighten it half-a-turn more with the help of the spanner.
NOTE: A spark which is too tight may cause irreversible damage to
the bolt.
Replace the spark plug cap by pressing it in firmly into place.