Sankosha LP-570E-V2, Инструкция по эксплуатации

Страница: 41 / 76

41
6. tou (Timer change which is shown on display)
・
According to instructions 1 and 2, you will see on the display, please push the
“Enter” button No.4.
・
Dial the “Setting & Select” knob No.5, the Timer List will be shown on the display
(reference Chart 5), so select the timer you want to change. Press the “Enter” button No.4,
and the current volume number will be shown on the display.
・
Dial the “Setting & Select” knob and change the timer. Press the “Enter” button No.4 to
confirm the set up.
Chart 5 “Timer” List
Disp. No. Setting Details
t 1
This timer can change the time that is changed to original position automatically
without any push from each timer setting.
t 2 This timer is for counter reset button how long keep pushing.
t 3
This timer is for pushing time of vacuum timer button for confirmation when you
change timer or any set up.
t 4
This timer is for service menu finishing time without any button push on service
menu mode.
t 5
This timer is for normal display timing from input test mode without any button
push.
7. dEF
（
to reset to Default
）
・
According to instructions 1 and 2, you will see on the display, please push the
“Enter” button No.4.
・
It is shown “OFF” on display, so please dial the “Setting & Select” knob and select “ON”,
then push the “Enter” button No.4. All settings will return to factory original shipping
conditions.
8. VEr
（
Program Version
）
・
According to instructions 1 and 2, you will see on the display, please push the
“Enter” button No.4.
・
The current version number will be shown on the display.