Sankosha LP-570E-V2, Инструкция по эксплуатации

Страница: 25 / 76

25
2: Set the Short Sleeve
● Press the Short Sleeve Button on the operation
panel. (The lamp turns ON.)
● Move both the left and right short sleeve device
to the front position.
Set the Left Short Sleeve
● Set the short sleeve. Hold the short sleeve by the right hand and press the Cuff Clamp
Button by using the left hand. (Do not let go of the button.)
→ The short sleeve is clamped.
● While pressing the Cuff Clamp Button, press the Start Button
by using the right hand.
→ The Shoulder Press goes down and the Front Press moves in front of the Body.
＊
The Front Press will come closer to the operator.
Set the Right Short Sleeve
● Set the short sleeve as left. Hold the short sleeve by the left hand and press the Cuff
Clamp Button by using the left hand. Press the Long or Short Button by using the
right hand. (You can select the long timer or the short timer.)
→ The short sleeve is clamped.
● While pressing the button, press the Start Button by the right hand.
→ The Front Press and the Rear Press close and automatic operation
start to work.
(Tuck Press does not close under the Short Sleeve Mode.)
・
When the end of the sleeve cannot reach the clamp, press and turn the Size Adjustment
Button ON. The sleeve arm closes and the clamp comes closer.
(Press and turn this button OFF so that the sleeve can be easily set.)
・
Under short Sleeve Mode, you can cancel the steam injection with Dip switch 7.
Please refer to page 38 for “5. diP (Dip Function Setting)
Tips!
Short
Sleeve
Device
※ I
f you want to set the short sleeve again, release the
Cuff Clamp Button. The Cuff Clamp opens, and you
can set the short sleeve once again.
※
If you want to set the short sleeve again, release Cuff Clamp
Button. The Cuff Clamp opens, and you can set the short
CAUTION