Sankosha LP-570E-V2, Инструкция по эксплуатации

Страница: 13 / 76

13
⑦
Size Adjustment Button (green lamp will flash when it is ON)
This button will make the sleeve arm position closer to the body when it is ON. It is
very useful if the short sleeve is too small to reach the original position.
⑧
Short Sleeve Button (green lamp will flash when it is ON)
Press this button ON to press a short sleeve shirt (not to work tuck press)
⑨
Warming-Up Button (green lamp will flash when it is ON)
Press this button ON prior to pressing a shirt; it will heat up the body. Please refer on
page 16 “Press warming-up Button”.
⑩
Enter Button (for Timer Remember) (green lamp will flash when it is ON)
This button is the registration button to remember all changes such as timer or
function.
⑪
Counter Clear Button
Press this button. "0" will blink at
⑬
"Display Window". Press
⑩
the "Enter Button".
You can reset the counter at "0". Press this button again. The window will show
garment counter.
⑫
Test Button (green lamp will flash when it is ON)
Press this button to start the test operation for each function. Please refer on page
33 “Test Operation”.
⑬
Display
It shows the counter, timer with count down, error number menu number and etc…
⑭
Power Lamp
The red lamp is blinking if it is turned on. Also, it is blinking with Emergency Stop
Button. It will flash and original position with reset button push.
⑮
Setting and Select Dial
This dial can change all timers and select menu numbers.