SANKO MR-300, Инструкция по эксплуатации

Страница: 22 / 35

-
21
-
5‑17
Measurement in the memory mode and releasing
Completing above item "
5‑16
Selecting the memory block" measurement in the memory mode can be
done.
When [Non Mem.] key
⑥
is pressed while measuring in the memory mode, the memory mode is
released and transfers to the measurement in non-memory mode keeping the hold mode ON.
5‑18
Measurement in the memory mode and printing out
◇
Confirm the ON condition of the hold mode before pressing the key
Mem. [BLK. X] is indicated blinking on the LCD.
↓
×
・
Ø (Selecting the storing blocks)
↓
Set Blinking [BLK.X] stops.
↓
Print [Prt] is indicated blinking on the LCD.
↓ ←
Cancel (When the setting is suspended)
Set Blinking stops, the memory measurement and printing can be available.
※
To release the printer mode, refer to "
5‑8
Releasing the printer"
5‑19
Measurement in the memory mode and communication with PC
◇
Confirm the ON condition of the hold mode before press the key
Mem. [BLK. X] is indicated blinking on the LCD.
↓
×
・
Ø (Selecting the storing blocks)
↓
Set Blinking [BLK.X] stops.
↓
Com. [COM:19200bps] is indicated blinking on the LCD.
↓
×
・
Ø (Selection of the communication speed)
(Example) [19200bps]
←
Communication speed to be set(blinking indication)
↓ ←
Cancel (When the setting is suspended)
Set Blinking stops, the memory measurement and communication with PC can be available.
※
To release the communication mode with PC, refer to "
5‑10
Releasing the communication with PC".