Assemble Upper Handle
Hold the upper handle so it curves away
from the cleaner. Then push it down over
the lower handle. Secure with the other 2-
part handle bolt (A).
Attach Lower Handle
Raise the dust cup support. Push the lower
handle (largest end down) through the tube
of the dust cup support and into the handle
socket at the back of the cleaner. Make
sure the notches on the lower handle
face the rear of the cleaner (Fig. 1). Align
the holes, insert a 2-part bolt (A), and
tighten.
A
A
Dust Cup
Support
Tube
Lower
Handle
Handle
Socket
Upper
Handle
Lower
Handle
Handle
Socket
A
A
Secure Cord Clamp
Secure the electrical cord to the dust cup
support with the cord clamp and screw (D).
Place the cord clamp over the electrical
cord. Screw the clamp to the tab below the
left latch; start the screw by hand, then
tighten.
7
Fig. 1
Toward Rear
of Cleaner
