GENERAL INFORMATION
The cleaner is designed to pick up dirt and dust particles. Avoid picking up hard or
sharp objects with the cleaner to prevent bag tears, hose clogs, and fan blade breakage
with subsequent motor damage.
Service Information
The instructions in this booklet serve as a guide to routine maintenance. For additional
service information telephone our toll free number for the nearest Eureka Authorized
Warranty Station. You should know the model, type and serial numbers when you
call:
USA: 1-800-282-2886
Mexico: 5670-6169
Canada: 1-800-282-2886
If you prefer, you can write to The Eureka Company, Service Division, 807 North Main
Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company,
866 Langs Drive, Cambridge, Ontario N3H 2N7.
DO NOT OIL the motor or the brush roll at any time. The bearings are
permanently lubricated and sealed.
HOW TO ASSEMBLE
CAUTION: Fully assemble the cleaner
before using.
Assembly Packet
The assembly packet contains two 2-part
handle bolts, 2 cord hooks, 2 bellows
screws and 1 cord clamp with a screw.
An extra belt is included with some
models.
Secure Bellows
Check to be sure the end of the bellows
is secure in the chrome bellows adapter.
Align the screw holes in the bellows
adapter with the back of the base, start
the screws (C) by hand, and tighten.
6
A
2-Part
Handle
Bolts
B
Cord
Hooks
C
Bellows
Screws
D
Cord
Clamp
and
Screw