background image

EZ Kleen

® 

Dust Cup and Bag

The cloth bag and the dust cup play a very important role in the efficiency of the
vacuum cleaner.  The cloth bag allows air to move through the cleaner while it traps
dirt inside the cloth bag and the dust cup.  When dirt particles cling to the cloth bag
they can restrict airflow,  If air cannot pass through the cloth bag, no cleaning can take
place regardless of how powerful the unit.  Some fine particles can restrict airflow very
quickly and will decrease performance even before the dust cup appears to be full.
For that reason, when vacuuming powder, flour dust, or similar fine substances, it may
be necessary to turn off the cleaner and empty the dust cup more often.
NOTE: Turn off the switch and unplug the electrical cord before emptying the

dust cup.  Never operate the vacuum cleaner without the dust cup latched
in place.

1. Unhook the clip from the top of the

cloth bag.

2. Shake the cloth bag to release dust

clinging inside.

3. Release each latch, one on either side

of the handle (push down on the lock,
lift up on the bottom and pull the top
forward.)

NOTE: Keep the latch free of dust

or obstructions that would
prevent it from locking
securely.

4. Lift the lid;  swing it up and outward.

5. Reach in, grasp the dust cup and pull

it out of the support.

6. Empty contents in a suitable container.

(If

 desired, the cup can be washed in

warm water using a mild soap solu-
tion.  Be sure the cup is completely dry
before replacing.)

7. Place the cup into the support, swing

the lid shut, and fasten each latch.

8. Hook clip to top of bag (refer to item

1).

3. Release

Latch

1. Unhook

Lock

                Push

  Down

11

4. Lift
    Lid

     Lift
     Up

7. Replace

Cup
and
Swing
Lid
Shut

5.Remove

Cup

6.Empty

Cup

2. Shake
    Bag

Содержание 680 Series

















Отзывы: