9
Version: 20221219
Vibro-I drive frame
The Vibro-I drive frame generates the vibrations for the Vibro-I unit.
It constists of
5.
Industrial springs, 4 off
6.
Vibro-I motor, 2 off
7.
Base plate
8.
Vibro-I stand
The two Vibro-I motors (6) together with the four industrial springs (5) create the vibrations
for the unit. The motors are adjusted from the factory according to the installed membrane
area, and will not work optimally for a different membrane area.
The base plate (7) is configured for mounting of one or four Vibro-I cartridges. The Vibro-I
cartridge(s) are fixed to the base plate using four bolts for each cartridge.
The Vibro-I stand (8) is designed for permeanent installation in the shop floor or on a larger
support structure. Foundation plan for each unit is available upon request. Drive frames for
10 and 20 m² units are supplied with machine feet that can be used until the units are
permanently installed. As an option, the 10 m² unit can also be supplied on wheels.
Vibro-I cartridge
The Vibro-I cartridge consists of
9.
4 or 8 HP1 membrane modules
10.
5 or 9 internal square o-rings
11.
Top and bottom cushion assembly
12.
Cartridge bottom plate with 4 rods
13.
4 nuts
14.
4 extension rods for 20 m² incl. threaded bushing
with o-rings
Vibro-I drive frame
14
14
13
13
11
9
11
9
9
9
10
10
10
10
10
12