1.
2.
3.
1.
1.
2.
1.
Attach additional EXP150M units together (optional)
If more than one EXP150M unit is to be used follow these instructions.
Slide the additional EXP150M units onto their desk stands (this must be done before proceeding to step 2)
Use the Connecting Brackets with screws to attach together multiple EXP150M units
Attached units will look like
Note that when using multiple EXP150M units, still, only a single Connecting Plate is employed, by the unit closest to the Sangoma phone.
Connect EXP150M uplink cable
On the back of the EXP150M, connect its uplink Ethernet port, using the supplied Ethernet cable, to the Sangoma phone's PC port
Connect EXP150M downlink cable (optional)
If additional EXP150M units are in use, connect the supplied Ethernet cable from the additional units' uplink ports to the downlink port of
the upstream unit as such:
The downlink port may also function as a PC pass-through port
Connect Power to EXP150M and Sangoma Phone
Connect the supplied 5V DC power supply to each EXP150M unit and power-on your Sangoma phone (EPOE or Et
5VDC using the phone's power supply)
