1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
1.
2.
3.
Serialization Label
Stand rail-mounting points
Power connector (DC 5 V, 1.2A tip positive) - Connect power supply
Uplink Port - To connect EXP150 to host phone using supplied Ethernet cable
Downlink Port - To connect additional EXP150 modules and provide PC pass-through
4 x Screw Holes - To attach additional EXP150 modules using connecting brackets
Installation
The following Instructions describe how to attach the EXP150 directly to the Sangoma Phone.
Attach EXP150M Stand to Phone Stand
Remove the handset from your Sangoma Phone
Remove the power cable (if used) and Ethernet cable from the phone
Remove the stand from the Sangoma phone
Lay the Sangoma phone face up on a smooth, flat surface
Slide the Connecting Plate onto the Sangoma phone stand and the EXP150 stand, ensuring that the plate is fully inserted, all the way
down onto the stands, as such:
Mount EXP150M and Phone on Stands
Slide the EXP150M's rear-stand rails onto its stand
Slide the Sangoma phone's rear stand-rails onto its stand
The finished product will look like similar to the following:
