Sangfor IAM 2.1, Руководство пользователя

Страница: 92 / 319

SANGFOR IAM v2.1 User Manual
91
page, as shown below:
Type a [Rule Name] to name this DNAT rule;
Select an [Ingress Interface];
Select a [Protocol], [All] the protocols or the [Specified] protocol TCP; enter [Source port] 0
(indicates all the ports), [Destination port] 80~80;
Enter the [Translate Destination IP To] 10.251.251.61;
Enter the [Map To Port] 80~80.
If [Advanced Settings] is checked, more settings are seen. Detailed introductions are as follows:
[Source Address]: Options are [All] and [Specified]. [All] means all the source IP addresses, while
[Specified] indicates that the source addresses are the specified ones.
[Destination Address]: Generally, [Specified interface address] is selected. If the WAN interface
has several IP addresses, you can select the [Specified network segment] to specify the WAN
interface IP address or IP range which are then be translated to the IP address of the local area
network.
[Destination Address] and [Source Address] can be configured at the same time. If both of them
are configured, only when both of the conditions are satisfied will the SNAT rule will be fulfilled;
if only one of the conditions is configured, then only the corresponding condition needs to be