Sangfor IAM 2.1, Руководство пользователя, Страница: 255 / 319

SANGFOR IAM v2.1 User Manual
254
[SMTP Server Address]: Configures the IP address or domain name of the SMTP server used for
delivering alarm emails.
[Username], [Password]: Type the username and password if the SMTP server requires
authentication.
Having completed configuring this page, you can click the <Send Testing Email> button to check
whether the email can be delivered successfully.
12.2. Proxy Server
In some cases, the users of the IAM gateway get access to the Internet through proxy. These users
are escaping the rules configured on the firewall module, as the firewall module decides whether
to allow or deny the data packet only according to the destination address and port.
To have the firewall module function, we first need to have the IAM gateway device to analyze
the real IP address and port through which the data packets are forwarded by the proxy, and then
enable the firewall to get the information.
The networking should be designed as that in the following figure:
The data packet must be ensured to go through the IAM gateway device before being forwarded to
the proxy, that is to say, the proxy should be at the WAN interface end of the IAM gateway device.
The configuration page is as shown below: