Sangfor IAM 2.1 Скачать руководство пользователя страница 14

Страница: 14 / 319

SANGFOR IAM v2.1 User Manual

WAN1 Interface: Network interface, to be defined as WAN1, LAN, or DMZ interface

WAN2 Interface: Network interface, to be defined as WAN2, LAN, or DMZ interface

POWER: Power indicator of IAM gateway device

ALARM: Alarm indicator of IAM gateway device (it keeps on for one minute

while the device is starting up)



Normally, the

ALARM

indicator keeps on lighting (in red) when the device is starting and

goes out in about one or two minutes, indicating successful startup of the device. After

startup, the

ALARM

indicator may flash, which means the device is writing logs; however,

if the

ALARM

indicator stays lighted for a long time and does not go out, please shut down

the device, and about 5 minutes later restart the device once again. If this situation remains

after restart, please contact our Customer Service to confirm whether the device is damaged.



The

CONSOLE

interface is only for debugging by technicians. The end users connect to the

device via the network interfaces.

1.4.

Configuration and Management

Before configuring the device, please prepare a computer and make sure the web browser (for

example, Internet Explorer browser) of the computer can be used normally. Then connect the

computer to the IAM gateway device (in a same local area network) and configure the IAM

gateway on the computer over the established network.

1.5.

Wiring Method of Standalone

Connect the power cable to the

Power

interface on the rear panel of the IAM gateway device and

switch on the power supply. The

POWER

indicator (in green) and

ALARM

indicator (in red) on

the front panel will be lighted. The

ALARM

indicator will go out one or two minutes later,

indicating the device runs normally.

Follow the instructions below to wire the interfaces:

Use standard RJ-45 Ethernet cable to connect the LAN interface to the local area network and then

configure the IAM gateway device.

Use standard RJ-45 Ethernet cable to connect the WAN1 interface with the networking device,

Содержание IAM 2.1
































































































































































































































































































































Результаты поиска

Содержание IAM 2.1

Отзывы:

Sangfor IAM 2.1, Руководство пользователя, Страница: 14 / 319

Результаты поиска

Содержание IAM 2.1

Отзывы: