Sangfor IAM 2.1, Руководство пользователя

Страница: 284 / 319

SANGFOR IAM v2.1 User Manual
283
[Source Port]: Type a service port (of the local-terminal segment). In this example it is 20-21.
[Destination IP]: Type an IP address (or the peer-VPN segment. In this example, it is the LAN IP
range of the Branch1, 172.16.1.1-172.16.1.254.
[Destination Port]: Type a port through which the peer VPN (Branch1) is to visit the services
(provided by the local terminal). In this example, it is 1-65535, all the ports.
Under the [Edit Multiline Routing Policy] page, select [Bandwidth stacking] and check the
<Advanced> button to enter the [Advanced Settings] page, as shown below:
Select the needed line for data transmission. In this example, it is from local line [Line 1] to peer
line [Line 1]. After that, click the <OK> button to save the settings.

In the above example, Branch1 has only one line connecting to its VPN headquarters. If the
branch has several lines connecting to the headquarters, you can select [Number of Peer
Lines] and select the needed lines in the list.

The [Advanced Settings] is only available for [Bandwidth stacking], [Active/standby] and