background image

013

Secondary services – DAB

Finding new stations – DAB

Some radio stations may have one or more additional broadcasts associated with them. If these are 
available, they will appear immediately after the main station as you rotate the Tuning control knob. To 
tune to the selected service, Press the Select button.

As time passes new stations may become available or you may have moved your radio to a different 
part of the country. In this case you may need to cause your radio to scan for new stations.

Press and hold the Power button to switch on your radio.

Press the Source button until the 'DAB radio' mode is selected.

Press the Auto Tune button to initiate the scan. Your radio will perform a scan of the Band III DAB 
channels. As new radio stations are found the station counter on the display will increase and the 
radio stations will be added to the list stored in the radio.

1.
2.
3.

Manual tuning – DAB

Manual tuning allows you to tune directly to the various Band III DAB channels (5A to 13F).

When in DAB mode press and hold the Info / Menu button to enter the DAB menu.

Rotate the Tuning control knob to select “Manual Tune”.

Press the Select button to enter manual tune option.

Rotate the Tuning control knob to choose the required DAB channel.

Press the Select button to cause the radio to tune to the chosen channel.

1.
2.
3.
4.
5.

Содержание DPR-42BT







































Отзывы: