08
GB
F
E
NL
D
radios providing special Remote Switch connection.
This function allows you to record radio stations
preset in your radio. The remote switch works with the
Sangean ATS-909, CCRadio plus, and Radio Shack
DX398 (all above not supplied).
2pcs of 3.5Φmm wire (not supplied) are required for
connection. Connect Remote jack on DAR-101 to the
Remote jack of your required recording input (e.g.
ATS-909X), then use the second wire to connect the
Line in jack of DAR-101 to the Line out jack of your
recording input.
Please refer to the radio or device’s manual for proper
operation of this feature.
Advanced setting and information
Contrast & backlight
1.
P r e s s t h e M e n u
button to enter the
main menu.
2.
Rotate the Tuning
control until SYSTEM
SETUP is highlighted,
and press the Enter
b u t t o n t o e n t e r
the setting. Rotate
the Tuning control
u n t i l D I S P L AY i s
highlighted and press the Enter button.
3.
Rotate the Tuning control until LCD CONTRAST is
highlighted, and press the Enter button to enter the
setting. Rotate the Tuning control to adjust the setting
from 1 – 12.
4.
Rotate the Tuning control until LCD BRIGHTNESS is
highlighted, and press the Enter button to enter the
setting. Rotate the Tuning control to adjust the setting
from 1 – 9.
Power saving
You can set the recorder to automatically turn off after a
preset time has elapsed to save the power.
power saving works when there is no ongoing playback,
recording or any other kinds of operation.
NOTE
1.
Press the Menu button to enter the
main menu.
2.
Rotate the Tuning control until
SYSTEM SETUP is highlighted,
and press the Enter button to enter
the setting. Then rotate the Tuning
control until POWER SAVING is
highlighted, and press the Enter
button to enter the setting.
3.
Rotate the Tuning control to adjust the power saving
time from 1, 3, 5, 10, 30 and 60 minutes, and press the
Enter button to confirm the setting. Or select “Off” to
disable the function.
Software version
1.
To view the software version of your recorder, press the
Menu button to enter the main menu.
2.
Rotate the Tuning
control until RECORD
SETUP is highlighted,
and press the Enter
button to enter the
setting.
3.
Rotate the Tuning
control until RECORD
VAR is highlighted,
and press the Enter
button to enter the
setting.
4.
Rotate the Tuning control until VAR SET is highlighted,
and press the Enter button to enter the setting. Then
rotate the Tuning control to choose ON and press the
Enter button to activate the VAR function.
5.
Rotate the Tuning control until VAR SENS is
highlighted, and press the Enter button to enter the
setting of VAR sensitivity.
Sensitivity can be set on LOW, MID and HIGH. High is
the most sensitive and can be used when there is little
background noise and you would like to record people in
a room, such as a meeting.
Timer play function
You can set up a specified time with the timer play
function of DAR-101, and your recorder will automatically
play your audio tracks according to your preset time.
1.
Press the Menu button to enter the
main menu.
2.
Rotate the Tuning control until MODE
is highlighted, and press the Enter
button to enter the setting. Choose
the setting from Once and Daily by
rotating the Tuning control and press
the Enter button Or choose OFF to
disable the timer play.
3.
Rotate the Tuning control until PLAY
TIME is highlighted, and press the
Enter button to enter the setting. The
hour digit of START TIME will begin
to flash. Rotate the Tuning control
to choose the hour as required,
and press the Enter button to finish
the setting. Then the minute digit will begin flashing.
Rotate the Tuning control as before to set the minute
as required, and press the Enter button to finish the
setting.
4.
Then the hour digits of STOP TIME will begin to flash.
Rotate theTuning control to set the hour as desired,
and press the Enter button. The minute digits will then
begin to flash. Rotate the Tuning control as before to
set the minute as required, and press the Enter button
to finish the setting.
5.
Now you have set the timer play of your DAR-101. The
recorder will automatically start playing the files from
your SD card device when the preset time is reached.
Your preset time can be activated in power off mode.
NOTE
Using the REMOTE jack
This unit has a REMOTE jack to which you can connect
