Sangean BTR-160, Руководство пользователя

Страница: 6 / 39

5
GB
Using the AC power adaptor
The AC power adaptor required for this unit should be 7.5 volts DC at 0.8A center pin positve.
Insert the adaptor plug into the DC socket on the left side of the radio.
Plug the adaptor into a standard mains socket outlet.
Whenever the adaptor is used, the batteries are automatically disconnected.
The AC adaptor should be disconnected from the main supply when not in use.
Navigation controls
This page describes the basic means of controlling your radio.
Instructions for each operating mode are given in the later section of this book.
1. Pressing the
Standby button brings your radio out of Standby mode. Pressing Standby while
the radio is in use will cause it to return to the Standby mode with the clock display.
2. Pressing the Mode button gives you access to each of the operating modes: DAB+ radio, FM
radio and BLUETOOTH (available only in BTR-160) .
3. Pressing the Menu button will access the menu system, whereas the Info button allows the
display of information relating to the radio station or music file being played.
4. Many operations require the user to make a selection from the menu. Highlight the menu item
using the
Tuning Control Rotary
on the right side of the radio. Press the
Tuning Control
Rotary to select that item. If there are more than five items in a menu, then the display will
automatically scroll up or down so that the additional items become visible. If there are many
items in a menu, then the radio allows the menu to “wrap around” in either direction. This can
make it easier to reach items at the end of a long menu.
5. If an error is made when navigating the menus, it is generally possible to go back to a higher
level menu by pressing the Back button.
1
2
3 3
4
5