background image

22

4)   The effective operation range between the system and the paired 

device is approximately 10 meters (30 feet). Any obstacle between 
the system and the device can reduce the operational range.

5)   Bluetooth connectivity performance may vary depending on 

the connected Bluetooth devices. Please refer to the Bluetooth 
capabilities of your device before connecting to your radio. All 
features may not be supported on some paired Bluetooth devices.

6)   With some mobile phones, making/receiving calls, text messages, 

e-mails or any other activities unrelated to audio streaming may 
mute the Bluetooth audio streaming or even temporarily disconnect 
from your device. Such behavior is a function of the connected 
device and does not indicate a fault with your BTR-160.

Display modes - Bluetooth

Your radio has a range of display options when in Bluetooth mode. Note 

that the availability of information depends on the specific media format.

1. Press the Info button to cycle through the different options.
  a. Artist

Displays the artist information for the track 
currently playing.

  b. Album 

Displays the album information for the track 
currently playing.

  c. Date

Displays the current date.

  d. Device name

Displays the device name for the track 
currently playing.

Playing audio files in Bluetooth mode

When you have successfully connected your radio with the chosen 
Bluetooth device you can start to play your music using the controls on 
your connected Bluetooth device.
1.  Once playing has started adjust the volume to the required setting 

using the Volume control on your radio or on your enabled Bluetooth 
device.

2.  Use the controls on your device to play/pause and navigate tracks. 

Alternatively, control the playback using Play/Pause (

), Next track 

(

), Previous track buttons (

) on the radio.

3.  Press and hold the Fast-forward or Rewind button to move through 

the current track. Release the button when the desired point is 
reached.

Note:

Not all player applications or devices may respond to all of these 
controls.

Playing a previously-paired Bluetooth source device

The BTR-160 can memorize up to 8 sets of paired Bluetooth source 
devices, when the memory exceed this amount, the earliest paring 
device will be over written from the device.
If your Bluetooth source device already paired with the BTR-160 
previously, the unit will memorize your Bluetooth source device and it 
attempts to reconnect with a Bluetooth source device in memory which 
is last connected. 
To connect to the required memorized Bluetooth device, you can also 
press and release the Pair button to enter the Bluetooth device memory. 
Then rotate the 

Tuning Control Rotary

 to find the desired memorized 

Bluetooth device and press the 

Tuning Control Rotary

 to connect to 

the required Bluetooth device.

Содержание BTR-160








































Отзывы: