SANEI ELECTRIC SK1-21A, Техническое руководство

Страница: 49 / 56

４９
SK1-21A/31A
9
．
Maintenance
9- 1 ． Maintenance
Periodically clean the printer to maintain the printing quality and avoid failures. It is recommended
to maintain the printer every 6 months or 1 million lines of printing.
（ 1 ） Print head
When cleaning the thermal dot line on the print head, use a cotton swab with alcohol
(ethanol, methanol or Isopropyl alcohol) and wipe off stains and dust.
（
2
）
Platen roller
When cleaning the platen roller, use a dry soft cloth and wipe off the stain with rotating
the roller.
（ 3 ） Sensor and peripherals
Clean the stain, dust and paper powder on the paper empty sensor and paper cover
sensor.
・ Prior to maintenance work, be sure to turn OFF the printer.
・ Avoid cleaning the print head immediately because the print head is hot.
Start maintenance work after the thermal head becomes cool.
・ Do not touch the print head with fingers directly. It may cause damage by
electrostatic discharge and contamination.
・
Do not touch the thermal head dot line with bare hands or metal objects.
・
Do not use volatile chemical agents, such as thinner and benzene.
・
Do not get moisture or spill liquids inside of the printer.
・
Turn ON the printer only after alcohol is completely dried.
Thermal dot line