SANEI ELECTRIC SK1-21A, Техническое руководство

Страница: 39 / 56

３９
SK1-21A/31A
6
．
Presenter
The details please refer to the separate document "product specifications".
In this chapter, explain operating mode regarding a presenter function.
Setting operating mode is to be referred with the subject on “4-5.Memory switch setting menue”.
6- 1
．
Specifications
- Available for three operating mode (Clamp mode/Retract mode/Eject mode &Continuous mode)
- Maximum 250mm for Paper issuing length.
- Maximum 240mm/sec for Paper issuing speed.
- Equip reflection-type photo sensor to detect paper.
- Maximum100um (85g/m2) for loading paper thickness.
6- 2
．
Operating Mode
（1）
Clamp / Retraction Mode / Eject Mode
During printing and feeding, Paper automatically feed out syncronized while the paper is caught by
clamp mode. After that, the paper is removed over the time-out by retraction mode or eject mode.
The timing chart is shown as below.
（2）
Continuous mode
Presenter is continued to feed syncronized with cutting by Continuous mode.
This mode is recommended if 250mm paper is over. Timing Chart is shown as below.