Page 7 of 28
then press up or down arrow key to adjust the value.
4. Once finish programming of the first digit, press
→
to start
programming the second digit which flashes. Press up or down arrow
key to adjust the value.
5. Press
→
again to program the third digit which flashes. Press up or
down arrow key to adjust the value.
6. When finish programming these 3 digits, press S for 3 seconds to save
with the screen flashes twice, beep buzzes twice. Then it will
automatically switch to next tire position.
7. Follow the above operations to program ID of other transmitters.
2.2 Standard Pressure Programming
For example, set the standard pressure of front right tire to 105 psi:
1. When finish programming ID, press P to access the standard pressure
