Page 13 of 28
program, the screen will display “NSP”.
When the transmitter is screwed onto the valve according to the
programmed position, the monitor can receive the signals and then
display the transmitter location icon, pressure, temperature information
on the screen. When all of information were received by the monitor and
the information are all normal, the screen display “ON”.
1. Installation of Transmitter:
1. Remove the current tire valve cap.
2. Inflate the tire to the standard pressure recommended by the
manufacturer or pressure needed by the user.
Note: Each transmitter has a lock to prevent it becomes loose or falls off.
Install the lock or not will not influence the functions of the
