Page 5 of 28
1.3 The monitor power wire consists of 3 different colors of wires. The
Black wire should be connected to the ground. The Red wire should
be connected to the vehicle’s continuous power supply. The Blue wire
should be connected to ignition switch, when switched to “ON”, the
blue wire is connected with 12V power.
The monitor starts to work after it is powered. At this time the monitor
cannot receive any information as the transmitters are not installed. The
screen shows “NSP”, which means there are “No Transmitters
Programmed”.
2 Programming of Monitor
Through the monitor, the user can program up to 38 transmitters ID
number and the standard pressure for each wheel. Operation steps are as
following:
3M Dual Lock
