Page 15 of 28
The function of the Lock is to connect the Transmitter and the Lock by
connecting the meshing part of them, and then fasten the Lock firmly by
the three bolts in the sockets, thus the Transmitter with the Lock can be
firmly screwed onto the valve and cannot be screwed off by a sudden
force.
Note: Security Lock and Transmitter should be installed at same time. If
the user chooses to use the lock, please refer to the below part of
lock installation.
Installation step of the Security Lock
1.
First connect the meshing parts of the Lock and the
Transmitter to make them an integrated part, and
then screw the Transmitter together with the Lock
firmly onto the valve, as shown in the lefet figure.
2. Lock the Transmitter
Use the wrench to fasten the three bolts inside the sockets on the Lock to
Transmitter
Security Lock
Wrench
