KSwitch D4 MM Managed Ethernet Switch - Preliminary User Guide, Rev. 0.9
// 21
4.1.
Faceplate Features
4.1.1.
RJ45 Copper Ethernet Ports
When connecting to a PC use a straight-through or a cross-over Ethernet cable and when connecting to an Ethernet
device use UTP (Unshielded Twisted Pair) or STP (Shielded Twisted Pair) Ethernet cables.
The RJ45 copper Ethernet ports ‘1’ up to ‘24’ are 10/100 Mbps Ethernet ports. The Ethernet ports labeled ‘G1’ and ‘G2’
are either Gigabit RJ45 copper Ethernet ports or Gigabit SFP fiber ports.
Figure 3: RJ45 Copper (10/100 Mbps) Ethernet Ports
8-port
12-port (4-ports on bottom side)
18-port
Table 3: RJ45 copper Ethernet Ports Pin Assignment
Pin
Signal
1, 2
T/Rx+, T/Rx-
3, 6
R/Tx+, R/Tx-
