S&T kontron KBox C-103-CFL Series, Руководство пользователя

Страница: 41 / 125

KBox C-103-CFL-x - User Guide, Rev. 1.0
www.kontron.com // 41
5.6. (X202) - WideLink Port
WideLink is an extension for the KBox C-103-CFL which implements a HDBaseT 2.0 transmitter for video and USB 2.0
signals. The HDBaseT standard can be used to extend the distance between a computer and a monitor of up to 150
meters, depending on the resolution and the cable quality. HDBaseT is also known as IEEE1911.
For pin assignment refer to subsection 13.2.1.
Only one of these two interfaces (WideLink and DP 3) can be ordered as optional extension
of your KBox C-103-CFL system.
5.7. (X201 or X206) Fieldbus or WiFi
5.7.1. Fieldbus
Your KBox C-103-CFL can optionally be extended with a module for Fieldbus communication. Either a module for
Profibus or Profinet/Ethercat communication will be integrated. Depending on the Fieldbus choosen, the DSUB brake-
out (X201) for Profibus or the dual RJ45 brake-out (X206) for Profinet/Ethercat will be used.
Only one of these two Fieldbus interfaces (D-Sub or dual RJ45) can be ordered as optional
extension of your KBox C-103-CFL system.
Figure 27: X201 or X206 – Locations for the optional FIELDBUS interface
5.7.2. WiFi/BT
To add a WiFI/BT functionality to the system, the mPCIe socket (on the bottom of the baseboard), will be used. This
connection can be implemented at factory only. The WiFi antennas will use the brake-out X206.
Table 6: WiFi/BT Expansion Card Option
Expansion slot Description
1x Wi-Fi mPCIe (half-size) Dual band frequencies (2.4 GHz & 5 GHz)
Bluetooth (BT) 4.1+HS
IEEE802.11 ac/abgn Wi-Fi certified
Speeds 300 Mbps max. on N & 867 Mbps on AC
The optional interface s (FIELDBUS) on the front side of the KBox C-103
must be ordered separately either as D-Sub (X201) or as dual RJ45 (X206)
connector. To add a FIELDBUS interface to the system, the mPCIe socket
(on the lower side of the baseboard), will be used. This connection can be
implemented at factory only.
X201 X206