KBox C-103-CFL-x - User Guide, Rev. 1.0
// 96
11.4.
uEFI Shell Scripting
11.4.1.
Startup Scripting
If the ESC key is not pressed and the timeout has run out then the uEFI Shell tries to execute some startup scripts
automatically. It searches for scripts and executes them in the following order:
1.
Initially searches for Kontron flash-stored startup script.
2.
If there is no Kontron flash-stored startup script present then the uEFI-specified startup.nsh script is used. This
script must be located on the root of any of the attached FAT formatted disk drive.
3.
If none of the startup scripts are present or the startup script terminates then the default boot order is
continued.
11.4.2.
Create a Startup Script
Startup scripts can be created using the uEFI Shell built-in editor edit or under any OS with a plain text editor of your
choice. To create a startup shell script, simply save the script on the root of any FAT-formatted drive attached to the
system. To copy the startup script to the flash, use the kBootScript uEFI Shell command.
In case there is no mass storage device attached, the startup script can be generated in a RAM disk and stored in the
SPI boot flash using the kRamdisk uEFI Shell command.
11.4.3.
Examples of Startup Scripts
11.4.3.1.
Execute Shell Script on Other Harddrive
This example (
startup.nsh)
executes the shell script named
bootme.nsh
located in the root of the first detected
disc drive (
fs0
).
fs0:
bootme.nsh
Содержание Kontron KBox C-103-0
Страница 2: ...KBox C 103 CFL x User Guide Rev 1 0 www kontron com 2 This page has been intentionally left blank...
Страница 28: ...KBox C 103 CFL x User Guide Rev 1 0 www kontron com 28 Figure 12 Block Diagram KBox C 103 CFL x...
Страница 124: ...KBox C 103 CFL x User Guide Rev 1 0 www kontron com 124...
