S&T kontron FlatView HYG, Руководство пользователя

Страница: 26 / 35

FlatView HYG – User Guide Rev. 1.0
www.kontron.com // 26
9/ Connectors
9.1. FlatView HYG Support Arm Connectors
The power, Display Port (DP) and USB 2.0 cables are factory installed and secured internally. The cables exit through
the support arm bracket and terminate externally with the following connectors or wires.
9.1.1. Power Connector
The power cable terminates with three colored wires with wired end ferrules to connect to a power source.
Table 9: Power Connector Cable with Wire End Ferrules
Wire Color Signal Name
Black GND
White VIN (24 VDC)
Green Functional Earth (FE)
9.1.2. Display Port
The display port cable terminates with a 20-pin DP connector.
Table 10: Display Port Connector Pin Assignment
Display Port Connector Pin Signal Name Pin Signal Name
1 TX0+ 2 GND
3 TX0- 4 TX1+
5 GND 6 TX1-
7 TX2+ 8 GND
9 TX2- 10 TX3+
11 GND 12 TX3-
13 GND 14 GND
15 AUX+ 16 GND
17 AUX- 18 Hot Plug Detect
19 GND 20 PWR
9.1.3. USB Touch
This USB touch connector provides a USB 2.0 (upsteam) connection and terminates with a USB 2.0 Type A connector.
Table 11: USB 2.0 Type A Connector Pin Assignment
USB Touch Connector Pin Signal Name
1 +5V
2 Data-
3 Data +
4 Ground