
COMe-bV26 - Rev. 1.0, User Guide
// 78
Sub-Screen
Function
Second level Sub-Screen/Description
AMD CBS>
FCH Common Options>
USB
Configuration
Options>
Combo PHY
Static
Configuration>
Controller 1 COMBO PHY
Static Config.
[Type C, USB Only, DP,
USB + DP, Auto]
AC Power Loss
Option
AC Loss Control
[Always Off, Always On, Reserved, Previous,
Auto]
UART
Configuration
Options>
UART 0 Enable
[Enabled, Disabled, Auto]
UART 0 Legacy Options
[Disabled, 0x2E8, 0x2F8, 0x3E8, 0x3F8,
Auto]
Warning:
Console redirection will not work if UART
legacy option sets to legacy address (0x2E8,
0x2F8, 0x3E8, 0x3F8).
UART 1 Enable
[Enabled, Disabled, Auto]
UART 1 Legacy Options
[Disabled, 0x2E8, 0x2F8, 0x3E8, 0x3F8,
Auto]
Warning:
Console redirection will not work if UART
legacy option sets to legacy address (0x2E8,
0x2F8, 0x3E8, 0x3F8).
UART Driver Type
[AMD UART Driver, AMD Serial Driver]
LPC Options
LPC Clock Run Control
[Enabled, Disabled, Auto]
SoC Miscellaneous
Control>
ABL Console Out
Control
Auto keeps default behavior
[Auto, Enabled, Disabled]
ABL PMU
Message Control
Auto keeps default behavior
[Auto]
AMD PBS>
AMD Firmware Version
Read Only Field
AMD Firmware Version
AGESA Version, PSP Bootloader Version, PSP SecureOS Version,
ABL Version, APCB Version, APOB Version, UCode Patch Version,
SMU FW Version, DXIO FW Version, MP2 FW Version, KVM Engine
Version, XHCI FW Version, VBIOS FW Version, GOP Driver Version,
EC FW Version, USB PD Section 1/2 FW Version, TI PD FW Mode, TI
PD FW Version
SSD Power Enable
[Disabled, SDD x1, SDD x2, SDD x4]
Note: SDD1 test only, item breaks WWAN, LAN, WLAN PCIe slot
GPP8/9 Select
[PCIE, SATA]
HDD Power Enable
[Enabled, Disabled]
ODD Power Enable
[Enabled, Disabled
iSATA0 Power Enable
[Disabled]
iSATA1 Power Enable
[Disabled]