S&T kontron COMe-bV26, Руководство пользователя

Страница: 49 / 94

COMe-bV26 - Rev. 1.0, User Guide
www.kontron.com // 49
Pin Signal Description Type Termination Comment
A82 LVDS_A_CK- LVDS Channel A Clock- / EDP
Lane 3 Transmit - DP-O --- Clock: 20-80MHz
A83 LVDS_I2C_CK
LVDS I2C Clock (DDC) / EDP AUX
+
I/O-3.3
PU 2K2 3.3V
(S0)
---
A84 LVDS_I2C_DAT LVDS I2C Data (DDC) / EDP AUX
- I/O-3.3 PU 2K2 3.3V
(S0) ---
A85 GPI3 General Purpose Input 3 I-3.3 PU 100K 3.3V
(S0) ---
A86
RSVD_A86
[1]
Reserved for future use NC --- ---
A87 eDP_HPD EDP Hot Plug Detect I-3.3 PD 400K LVDS
/ 100K EDP ---
A88 PCIE_ Reference PCI Express Clock + DP-O --- 100MHz
A89 PCIE_CLK_REF- Reference PCI Express Clock - DP-O --- 100MHz
A90 GND_A90 Power Ground PWR
GND --- ---
A91 SPI_POWER 3.3V Power Output Pin for
external SPI flash O-3.3 --- 100mA (max.)
A92 SPI_MISO SPI Master IN Slave OUT I-3.3 ---
A93 GPO0 General Purpose Output 0 O-3.3 PD 100k ---
A94 SPI_CLK SPI Clock O-3.3 --- ---
A95 SPI_MOSI SPI Master Out Slave In O-3.3 --- ---
A96 TPM_PP TPM Physical Presence I-3.3 PD 10K TPM does not use
this functionality
A97 TYPE10#
Indicates TYPE10# to carrier
board
NC --- ---
A98 SER0_TX Serial Port 0 TXD O-3.3 ---
20V protection
circuit implemented
on module
A99 SER0_RX Serial Port 0 RXD I-5T PU 10K 3.3V
(S0) 20V protection
circuit implemented
on module
A100 GND Power Ground PWR
GND --- ---
A101 SER1_TX Serial Port 1 TXD O-3.3 --- 20V protection
circuit implemented
on module
A102 SER1_RX Serial Port 1 RXD I-5T PU 10K 3.3V
(S0) 20V protection
circuit implemented
on module
A103 LID# LID Switch Input I-3.3
PU 47k 3.3V
(S5) 20V protection
circuit implemented
on module
A104 VCC_12V_A104 Main Input Voltage (8.5-20V) PWR
8.5-
20V --- ---
A105 VCC_12V_A105 Main Input Voltage (8.5-20V) PWR
8.5-
20V --- ---
A106 VCC_12V_A106 Main Input Voltage (8.5-20V) PWR
8.5-
20V --- ---