KBox B-201-CFL - User Guide, Rev 1.3
// 48
Figure 36: 24 VDC Wired Power Cable
1
Mating connector to DC_IN
2
Wires ferrules for 24 VDC source.
Black wire (-) & white wire (+)
To connect the 24 VDC power cable, perform the following:
1.
Set up the product with any expansion devices and SSDs.
2.
Check that the I/O connections on the rear side are firmly connected.
3.
Check that the top cover and SSD drive bay cover are secured.
4.
Screw the 24 VDC power cable ( Figure 36, pos. 1) to the DC-IN power jack (Figure 5, pos. 10).
5.
Connects the 24 VDC power cable’s two-wired ferrules black wire (-) and white wire (+) (Figure 36, pos. 2)
to a separate 24 VDC power source.
6.
Apply power to boot up and start the KBox B-201-CFL.
Clearly mark the two-wired ferrules on the 24 VDC power cable to ensure proper connect,
black wire (-) & white wire (+).
2
1
